Wall-mounted portable lifting system
HANDI - MOVE HM 2420
The wall-mounted lifting system HANDI-MOVE HM 2420 is used to move the client in a suitable sling within one room of the building. The system is solved with the presence of an accompanying person.
Wall-mounted portable lifting system
HANDI - MOVE HM 2420
The wall-mounted lifting system HANDI-MOVE HM 2420 is used to move the client in a suitable sling within one room of the building. The system is solved with the presence of an accompanying person.
APPLICATION
The wall-mounted portable lifting system HM 2540 is intended for clients in wheelchairs with a certain degree of independence and is also suitable for clients with a greater degree of disability. It is intended for use by a person with an escort. It enables immobile people to move from a wheelchair to a bed, toilet or bath. Control is handled by a wired electric remote control.
FUNCTION DESCRIPTION:
A suitable handle is attached to the lowered lifter, into which the client is caught. It is then lifted using a handle and transported to the desired location. After the transfer is completed, the handle is removed from the client and the jack is turned to the parking position.
OPTIMAL LOCATION:
HM 2420 can be used in several places in the apartment where the original handle is installed, either on the wall or on the stand. It is optimal for family and panel houses, schools, homes for the elderly and rehabilitation institutions.
ADVANTAGES:
The advantages are quiet operation, simple operation, the possibility of arbitrary stops and a cable controller in your hand. All activities are powered by batteries with a voltage of 24 VDC or by connecting to an electrical network with a voltage of 230 VAC. The construction is solid and safe and can be used throughout the apartment, including the bathroom. The client himself can control the descent and ascent without the help of another person. In case of complete discharge of the drive accumulator, an emergency descent is possible. The use of various systems to ensure the movement of people with disabilities, such as a lifting tarpaulin, a seat, a lifting hook, a platform and a stand-up holder.
• Maximum lifted weight 145 kg.
• Length and width of the mounting plate 687 mm x 140 mm.
• Stand - outer cross-section 80 x 50 mm.
• Max. length 3000 mm.
• Extension of the arm from 950 to 1300 mm.
• Lift range from 680 to 980 mm depending on arm extension.
• Weight 16 kg.
• Safety mechanism built-in.
• Cable controller (also usable in water), buttons on the engine.